Set the Agent Experience to use PSTN

The Agent Experience is the application from which a CCPro agent makes, receives and manages calls (or other interactions such as SMS and Chat).


If you wish to use your Desk Phone or Mobile Phone to handle the audio for CCPro calls, you should first amend the settings.


To do this, click the User Profile icon at the bottom left of the screen.From the resulting menu, click Phone Settings

Then, in Station Settings, set the following:

Device Type: PSTN Phone

Phone Number: The number of the Desk Phone or Mobile Phone you wish to pass calls to
Caller ID: The number to present when CCPro makes an initial call to check audio.

This can be your external IVR number. In some cases you can simply set it to be the same as the Phone Number field.
Leave the other options unticked.

Then, press SAVE.


Logging into the Agent Experience

By default, an agent will launch the Agent Experience by clicking the “START SESSION” button on the top right of the CCPro webpage, once logged in.

A screenshot of a computer

Description automatically generated with medium confidence Once clicked, the Agent Experience will attempt to confirm the agent’s audio by displaying the message “Confirming Station”.

Graphical user interface, application

Description automatically generated

At this point, the agent needs to listen for a short tone in their headset, and then speak into their microphone so that the system can verify two-way audio.

Once audio is confirmed, the following message will appear.

The agent is now logged in. However, as a one time change, you now need to change the settings in the Agent Experience to send calls to your Desk Phone or Mobile Phone


Click the Hamburger Menu at the top left of the Agent Experience.


Select Station Settings

Change the Phone option to PSTN

Phone Number: The number of the Desk Phone or Mobile Phone you wish to pass calls to
Caller ID: The number to present when CCPro makes an initial call to check audio.

This can be your external IVR number. In some cases you can simply set it to be the same as the Phone Number field.

These are the same options set earlier in this guide and should use the same values.
Leave the other options unticked.

Then press SAVE


CCPro will now call your specified Desk Phone or Mobile Phone for an Audio Check, displaying the message “Confirming Station”.

Graphical user interface, application

Description automatically generated

At this point, the agent needs to answer their Desk Phone / Mobile Phone, listen for a short tone, and then speak into their microphone so that the system can verify two-way audio.

Once audio is confirmed, the following message will appear.

The agent is then fully logged in.


Once you are Logged In

A typical Agent Experience set up will look like this once the agent has logged in.

Graphical user interface, application

Description automatically generated

The agent here is set to “Not Ready”, meaning they will not receive any calls at this point.

However, the actual state the agent will be placed into can vary according to configuration.


Controls

Below, some of the common items are highlighted.

A picture containing graphical user interface

Description automatically generated


Taking an Inbound Call

When you are ready to take a call, click on the Ready button and you will be placed into a Ready state.

At this point, any calls in queues you assigned to, may route to you.

Graphical user interface, application, Teams

Description automatically generatedIf you then wish to go back into a “Not Ready” state (so you don’t get any more calls”, you can do so by selecting the drop down on the “Not Ready” button, and choosing the most appropriate state. These will vary according to your contact centre’s configuration.


You can do this while still on your current call, to prevent further calls coming through immediately afterwards.

Graphical user interface, application

Description automatically generated

  You are now back in a Not Ready state (in this case, Lunch), and will not receive any further calls.

A screenshot of a computer

Description automatically generated with medium confidence


Making an Outbound Call

You can make an outbound call regardless of your State.
To do this, click “New Conversation” at the bottom, and select “Call” from the list.

A screenshot of a phone

Description automatically generated with medium confidence

 From the New Call window, select the number you wish to present the call being from – often there is only one option here, but there may be more depending on your contact centre’s configuration.


Then, type in the number you wish to call.
You can also type names from the contact list in here.


Then press the green “Call” button.

Graphical user interface, text, application, email

Description automatically generated

CCPro will call your Desk Phone or Mobile Phone. You should answer the call.

The outbound call will now ring out and, hopefully, be answered by the recipient.


You will then see the following screen.

Graphical user interface, application

Description automatically generated

This screen shows you the number dialled, the queue name that is being used for the call, and the various call controls – Hold (this plays hold music), Mute (the other person hears silence), Hang Up, and Keypad. Keypad is used if you have called a menu with options, it allows you to press the required option.

The small arrow next to the queue name (in this case the queue is “Support Daily Checks” points upwards to indicate this is an outbound call.

 

Once the call is ended by either party, you may be presented with a wrap-up button as below.
This may or may not have a timer counting down, and it may or may not have some “dispositions” (reasons for the call) that can be selected. When you have finished working on the call, you would click the blue “Complete Wrap-up” button. 

 

On an outbound call, you will normally return to whatever state you were in when you started the call (in this case, lunch), but if you want to make sure you get no further inbound calls, you would select a Not Ready state from the dropdown at the top.

Graphical user interface, application

Description automatically generated


Receiving an Inbound Call

An inbound call will only be presented to you when you are in a green “Ready” state.

CCPro will call your Desk Phone or Mobile Phone. You should answer the call.

While the Desk Phone or Mobile Phone is ringing, CCPro will show "Routing".

Once you have answered the call, or once the call has been auto-answered, the call screen you will be presented with is almost identical to the screen for outbound calls, except the small arrow points downwards to indicate this is an inbound call.


You would then complete the call in the same way as for outbound calls.

Graphical user interface, application

Description automatically generated


Transferring Calls

Call transfers work exactly the same on both inbound and outbound calls.

To commence a transfer, start by clicking the Transfer button while on the call.

Graphical user interface, application

Description automatically generated

 You now have three options for the transfer destination:
User, Queue or External Destination


User:

Select both the user you wish to transfer to, and the relevant queue they are working from.

Graphical user interface, application

Description automatically generated

Queue:

Select the queue you wish to transfer the call into. This will mean the transferee will not know which agent they are likely to get – although there is some helpful information about the queue availability and wait times that you can optionally provide to the transferee.

Graphical user interface, application

Description automatically generated

External Destination:

Type in the number you wish to transfer the call to.
Just as with outbound calls, you can also type in names from the Contact List here.

Graphical user interface, application

Description automatically generated

 There are then three types of transfer available to you once you have connected the call:


Blind Transfer:
The call is transferred away with no announcement. This is not commonly used as it is a poor experience for the other party!


Hold and Consult:
The original call is placed on hold while you speak to the transfer destination to announce the call


Conference:
All three parties speak together ahead of the transfer

Graphical user interface, application

Description automatically generated

 With a “Hold and Consult” transfer, when the original caller is on hold, you will have these call controls.

Graphical user interface, application

Description automatically generated

The first call in the list is your original call.

The second call is your transfer destination.


You can swap between calls using the “Hold” and “Resume” options as per the screenshot above.

When you are ready to transfer, click “Blind Transfer” to send the original caller to the transfer destination. 

If you wish to conference all three, click “Merge”.
 

After the transfer, complete the call in the same way as described above using the “Complete Wrap-up” button.

Graphical user interface, application

Description automatically generated


Logging Out

When you are ready to log out of the system, please do NOT click the “X in the top tight of the Agent Experience without first performing a full log out. If you do, you will stay logged in and calls will still be presented to you, which will then be missed.


To log out, first ensure any calls you are on are fully completed.

Then click the “Hamburger Menu” and select “Log Out”


 You can now click the “X” top right to completely close the Agent Experience.